[Date Prev][Date Next] [Chronological] [Thread] [Top]

RE: Smart Cards & New Table Top Card Readers



FYI

 

The oval card was the old Solaick French design Microprocessor card we got from I-Mark Days they are no longer made

The L shape card is the new Microprocessor Card made to act like the old Solaick French design card by Card Logics in California.

The other two are identical 1K memory cards that Card logics made for us, it is just a different chip manufacturer that card logic chose but functionally they are identical

 

Juan A. Rivera

 

-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Jeff Hintz
Sent: Tuesday, August 29, 2000 3:21 PM
To: bugtrack@dieboldes.com
Subject: RE: Smart Cards & New Table Top Card Readers

 

I just finished doing a small test here in the Omaha office, and here is what I produced.  I ran the CPM program to be able to produce Manager Cards.  Using a tabletop model - Rev. B, and Voter Card.dll - Version 3-12-6-1, I was successful in programming the 4 different types of cards that I have.  The oval chip card, a square chip card with an X shape, a square chip card with the word ATMEL at the bottom, and a square chip card in the L shape.  Those are the exact cards I had in Barrie, and I was only successful with the square chip card in the L shape.  However, I did not have the CPM program installed on any equipment, there in Barrie.  I don't know if that helps or not, but just thought I would try the test here in Omaha.

-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Ian S. Piper
Sent: Tuesday, August 29, 2000 12:56 PM
To: bugtrack@dieboldes.com
Cc: Bonnie Merritt (E-mail)
Subject: RE: Smart Cards & New Table Top Card Readers

Global McKinney had never shipped Manager Cards to Barrie, ON, prior to Jeff Hintz's arrival there last week. I don't know where the ones Jeff mentioned came from.

 

The current revisions of the External Smart Card Reader are A, B, C, and D.  If Global Vancouver already has some external card readers there, perhaps they could tell me what revisions they have and I could ship the revisions they don't have.

 

I can provide samples of various versions of smart cards used by Global over the centuries.  I'll send Bonnie some info so she can create a work order for these parts.

 

Ian

-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Jeff Hintz
Sent: August 29, 2000 12:19 PM
To: bugtrack@dieboldes.com
Subject: RE: Smart Cards & New Table Top Card Readers

The City of Barrie had 2 Manager cards there with the Gems system.  A 1K card, (the old oval chip card), and a 64KB card, (the square chip card with a L shape).  I don't know if these cards were left from the first election that was done with the old I-Mark system, or if left from demostrations after that.

 

Yes the 1K Manager cards work on my table top reader here in Omaha.  But I have a table top model that is Rev. B, and the table tope models sent to Barrie were Rev. D.

 

Also, you might want Ian to send you all the different Smart Cards & Smart Card Readers that they currently have in McKinney, and make sure all are working.

-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Talbot Iredale
Sent: Tuesday, August 29, 2000 12:09 PM
To: bugtrack@dieboldes.com
Subject: Re: Smart Cards & New Table Top Card Readers

Jeff,

 

    Two questions:

 

    1)    Since Ian states they have never send 1K Manager cards where did the 1K manager cards come from?

    2)    Do the 1K Manager cards work on other readers?  If they do then I would like to get a the 1K manager card and a new reader so we can determine what the problem is and get it fixed.

 

Tab

 

 

 

----- Original Message -----

From: Jeff Hintz

To: Bugs List (E-mail)

Sent: Wednesday, August 23, 2000 3:21 PM

Subject: Smart Cards & New Table Top Card Readers

 

I am doing training here in the City of Barrie, Canada, and I have encountered with the new table top card readers sent here, that they cannot read some of the different smart cards that we have.  So far I have only been able to get the square smart card with the shape of an L able to read.  Once I am able to get into the Poll Book software with this card, I can create voter cards with any of the other cards that I have, and they work fine in the AVTS units.  Is there anyone else that has encountered these problems???

 

Jeff Hintz

Global Election Systems