[Date Prev][Date Next] [Chronological] [Thread] [Top]

RE: Modems not Responding 1-17-3



Well, for the record this isn't really a "bug" since USR rackmount modems aren't exactly approved GEMS hardware.  That said, I'll take a look at this once I get a couple of items off my plate.  Worst case we might have to order the hardware to test, which will be expensive.  Hopefull that won't be necessary though.
 
Ken
 
 
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Mike Brown
Sent: Monday, September 11, 2000 10:49 AM
To: Bugtrack@Gesn. Com
Subject: Modems not Responding 1-17-3

Location: Ottawa
 
Ottawa has been have some problems with their Modem bank not responding to GEMS.
Up until now they have been using VTS.  They have now upgraded to GEMS 1-17-2.  The Modem bank is  2xUSRobotics Total Control MP/16 v.34 modems (configured as Courier v.34) for a total of 32 modems.
When the ports are activated the Modem status stays at Connecting to Modem.  It has been left on for approximately 10 minutes and still say connecting to Modem.
 
I have attached  the Manual for the USR Modem Bank.
 
Here is some background and testing that Dennis has done.
 

Hey Mike

They were running VTS, using the Digi Board in the server connected to

1xDigi Ports/16em (serial box) and 12 external modems connected to the Digi

Ports... They were not using our current USRobotics Total Control MP/16 v.34

stack modems...

I did some more testing this morning... Here's a description of the test:

- We currently have a Digi card in the Server, connected to 2xDigi

Ports/16em (serial box = 32 ports), connected to 2xUSRobotics Total Control

MP/16 v.34 stack modems (16 modems on each box = 32 modems)

- Test #1:

I used a separate external 56k USRobitcs modem, connected to 1 port on the

Digi Ports/16em serial box, GEMS recognized it and worked

- Test #2:

I connected 1 of the modems from the USRobotics Total Control MP/16 v.34

stack modems box, connected it directly to Com1 on the server, GEMS did not

recognize it...

Problem is with GEMS and the USRobotics Total Control MP/16 v.34 stack

modems, not the DIGI card or the serial box...

I'm going to verify my dip switches and modem configurations on these

USRobotics Total Control MP/16 v.34 stack modems..

Any other suggestions would be appreciated...

Thanx Mike