[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: Potential Issue 4.3.11 BS



Don,
 
    This problem will re-occur after casting the same number of ballots as before (ie every 100 ballots).  The best solution is to re-boot the system every 100 ballots (or so) while at the Insert Voter Card screen.

Tab
----- Original Message -----
Sent: Tuesday, November 05, 2002 4:24 PM
Subject: RE: Potential Issue 4.3.11 BS

Tab, some of the units, seems like most are freezing, not allowing them to respond.  If they reboot, it may solve the problem for a while, but usually comes back.  Are we running the risk of losing votes by powering down and up a number of times.
-----Original Message-----
From: owner-support@die boldes.com [mailto:owner-support@dieboldes.com]On Behalf Of Talbot Iredale
Sent: Tuesday, November 05, 2002 2:09 PM
To: support@dieboldes.com
Subject: Re: Potential Issue 4.3.11 BS

I have tracked down the problem.
 
The problem is with the memory for the text on the Instruction screen not being released after it has been used. This problem was fixed in BS 4.1.12.
 
Tab
----- Original Message -----
Sent: Wednesday, November 06, 2002 4:38 AM
Subject: RE: Potential Issue 4.3.11 BS

Steve, Tab is looking at this, and will call Merle from the KSU Election Center when he is able to provide more meaningful information.
 
Nel
-----Original Message-----
From: owner-support@dieboldes.com [mailto:owner-support@dieboldes.com]On Behalf Of Steve Moreland
Sent: Tuesday, November 05, 2002 1:34 PM
To: Support
Subject: Potential Issue 4.3.11 BS

In Ga. we're seeing the following error:
"Program Memory Critically Low"
 
The directions we've received are:
1) touch the OK button
2) Do you wish to convert stored memory to program memory? - Touch OK or yes
 
Once the ballot has been cast, re-boot the machine, and continue voting.
 
 
Regards,

Steve Moreland
Director of Customer Service
Diebold Election Systems, Inc.
1-800-433-8683
972-542-6000
stevem@dieboldes.com