[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: AVTS modem upload BS 4.3.11



i understand the concept -  but thru the direct lan -   I can type ping
xxx.xxx.x.x but if it is a modem I am pinging  who dials who - or does it go
out across the phone line? is that clearer - I just cannot conceptualize the
pinging across modem lines.
----- Original Message -----
From: "Talbot Iredale" <tiredale@dieboldes.com>
To: <support@dieboldes.com>
Sent: Tuesday, November 05, 2002 1:17 PM
Subject: Re: AVTS modem upload BS 4.3.11


> Tari,
>
>     'Ping' is a command you execute from the command line in windows.
'Ping'
> is used to check to see if a machine is connected to the network.
Therefore
> if the IP address if the machine you are checking (in this case the AVTS
> unit) is 192.168.1.2 you enter 'ping 192.168.1.2'. This is really an
> advanced networking command so if you do not know how to use it that is
> okay.
>
> Tab
>
> ----- Original Message -----
> From: "Tari Runyan" <tarir@dieboldes.com>
> To: <support@dieboldes.com>
> Sent: Tuesday, November 05, 2002 11:38 AM
> Subject: Re: AVTS modem upload BS 4.3.11
>
>
> > ok - dumb question - how do you ping with a modem?
> > ----- Original Message -----
> > From: "Talbot Iredale" <tiredale@dieboldes.com>
> > To: <support@dieboldes.com>
> > Sent: Tuesday, November 05, 2002 12:38 PM
> > Subject: Re: AVTS modem upload BS 4.3.11
> >
> >
> > > The ping is done across whatever connection you have to the AVTS. If
the
> > > connection is via modem then the ping is done over the modem. If the
> > > connection is through a network card then the ping is done over the
> > network
> > > card.
> > >
> > > Tab
> > >
> > > ----- Original Message -----
> > > From: "Tari Runyan" <tarir@dieboldes.com>
> > > To: <support@dieboldes.com>
> > > Sent: Tuesday, November 05, 2002 11:27 AM
> > > Subject: Re: AVTS modem upload BS 4.3.11
> > >
> > >
> > > > is the pinging done across the LAN or modem ? if we sucessfully ping
> > > across
> > > > the lan will the modems be ok?
> > > > ----- Original Message -----
> > > > From: "Talbot Iredale" <tiredale@dieboldes.com>
> > > > To: <support@dieboldes.com>
> > > > Sent: Tuesday, November 05, 2002 11:55 AM
> > > > Subject: Re: AVTS modem upload BS 4.3.11
> > > >
> > > >
> > > > > I have tracked down the problem with RAS (modem) connections on
> > Windows
> > > > NT.
> > > > >
> > > > > As Rob determined from testing the issues is with 'Software
> > > Compression'.
> > > > > This bug is fixed in SP6 but due to the way service packs are
> > installed
> > > > the
> > > > > service pack must be installed AFTER then software it is fixing is
> > > > > installed. Therefore when RAS is installed on Windows NT SP6 must
be
> > > > > re-installed to fix this problem.
> > > > >
> > > > > I have tested this on a machine here.  What I did was:
> > > > >
> > > > > 1) Install Windows NT
> > > > > 2) Install SP6a
> > > > > 3) Install RAS
> > > > > 4) Tried to connect from the AVTS to the WinNT machine.
> > > > > 5) Tried to ping the AVTS and failed.
> > > > > 6) Re-installed SP6a
> > > > > 7) Connected AVTS to WinNT
> > > > > 8) Tried to ping the AVTS unit and succeeded.
> > > > > 9) Uploaded from the AVTS unit to GEMS and succeeded.
> > > > >
> > > > > Hope this helps.
> > > > >
> > > > > Tab
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Robert Chen" <robertc@dieboldes.com>
> > > > > To: <support@gesn.com>
> > > > > Sent: Monday, October 28, 2002 1:30 PM
> > > > > Subject: AVTS modem upload BS 4.3.11
> > > > >
> > > > >
> > > > > >
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > Found something interesting here in Alameda County, and want to
> see
> > if
> > > > > > anyone has found this in the field.  Especially those of you who
> are
> > > > doing
> > > > > > AVTS (we don't do AVOS) modem upload from the precincts.
> > > > > >
> > > > > > Running:
> > > > > > BS 4.3.11
> > > > > > GEMS 1.18.14
> > > > > > NT 4.0 6a
> > > > > >
> > > > > > I am dialing the central computer's bank of modems (connected
via
> > Digi
> > > > PCI
> > > > > > X/em) and connecting to NT's Remote Access Server.  I have
> assigned
> > a
> > > ip
> > > > > > pool (166.107.248.210 to 220) and the AVTS with PCMCIA card
modems
> > > dial
> > > > in
> > > > > > okay, and make a connection with the RAS server.  I can see the
> > > assigned
> > > > > ip
> > > > > > address to the incoming AVTS unit.  However, when I try
uploading,
> > it
> > > > > gives
> > > > > > and error: "no connection to host".  Yes, I have confirmed the
> HOST
> > > name
> > > > > and
> > > > > > tried the IP address.
> > > > > >
> > > > > > I tried pinging the AVTS unit and only get timeouts.  I then
tried
> > > > > > simulating the connection with my laptop and was able to
> > successfully
> > > > > > upload.  I was also able to ping my laptop from the server and
> vice
> > > > versa.
> > > > > >
> > > > > > At this point, I do not think, despite the port information
> > displayed
> > > by
> > > > > RAS
> > > > > > Server, that the AVTS was taking the ip address.
> > > > > >
> > > > > > I am sure I am probably doing something wrong and would
appreciate
> > > some
> > > > > > enlightenment.
> > > > > >
> > > > > > rob chen