|
Can someone in the know please explain this. I suppose
that would mean Phil in this case. I do not get “8meg memory” when
I boot my machine. I do get: 8MB Flash sound at 0xa0000000 8MB Flash sound at 0xa8000000 Is this the message you are talking about
Lesley. My build date is Furthermore, there is no evidence that I
am aware of that the memory leak has anything to do with the CE image. Bug 2258, 1243, and 1179 did not involve
any changes to the CE image. If
someone has such evidence, can they please explain it. It is very damaging to have incorrect or
incomplete information posted to the support list. -----Original Message----- Greetings...I am sitting here with
Phil Wylie of AVTS repair fame and he has a message for all: On units that show "system
halt" errors or lose the touchscreen, etc. typically we have discovered
these to be software related. Units that show two memory totals
when turn on machine: 8meg memory 8meg memory these units can be reformatted with
WinCE 3.0 (8.8.02) and should stop these system halt errors. The units need to be reformatted
with WinCE and have Ballot Station re-installed. Should be seeing 16mg memory
indicated at boot. Have found that each level of Ballot
Station software works best with specific WinCE editions. For example: WinCE
2.1.2 goes with 4.1.xx
Win CE 3.0 (8/8/02) goes with 4.3.xx BS 4.1.x may work with WinCE 3.0,
but will occasionally need to be rebooted to clear memory. If not, unit
will lock up and touchscreen becomes non-functioning. We have found that by resolving the
software issues, motherboards that at first showed errors, are in fact now
fine. If you have questions or want
further info, call Phil in McKinney. ______________________________________________________________________________________________________________ Lesley Koop Thompson |